|
|
NEW SINGLE SPINDLE RECUTTER
|
||||||||||||
| Semi-Automatic Single Spindle Recutter • Designed for implicity and durability for cutting paper tubes up to 12 long into any desired lengths with burr free ends • Five minutes set-up times from one inside tube diameter to another. Tubes with different outside diameters will take only three minutes • You will be able to set up batch runs for your cut tube lengths with a push of a button. A signal light will indicate when a batch is completed • Handles any outside tube diameters from 1 1/2"OD to 8" OD • Can be suited for larger tube diameters and lenghts • Tube cuts done against hardened ring for burr-free cut • Tubes slide over mandrel plugs spaced according to tube lengths • Cutting wheel head can be manual or automatic • Programmable console runs together with automatic tube advance • 3/4" maximum wall thickness Operation: • Paper tube is fed onto the cutting mandrel from right to left of the operator's station. The tube is then fed toward the cutting wheel by a pre-selected digital motor control that feeds the tube to the desired lengths. • The downward motion of the knife handle automatically starts the tube rotating while being cut and stops the rotation when the arm is raised. When in the raised position, a signal is sent telling the automatic feed to advance the tube to the next pre-selected cut. • The previous cut tube will be pushed off the cutting mandrel as the next tube advances. If a longer tube length is required, a roller bed table is used for either a manual removal or, if desired, drop onto a parallel catch tray stand. |
||||||||||||||
|
SINGLE SPINDLE RECUTTERColor
|
||||||||||||||
 |
||||||||||||||
| • 3/4" I.D. - 30" O.D. tube diameters • 27" - 74" tube lengths • 1" maximum wall thickness • 2 3/8" minimum cut length • 10 knivesd maximum • No tooling required |
||||||||||||||
